​杭州玉沃自动化设备有限公司

Hangzhou Yuwo Automations Equipment Co.,Ltd.​​​

190501 Velomitor* CT Velocity Transducer
190501 Velomitor®CT低频速度传感器，专为冷却塔振动监测设计，转速低至90rpm。
常用型号：190501-01-00-00，190501-12-00-00，190501-10-00-01___
190501 Velomitor* CT Velocity Transducer
190501 Velomitor®CT低频速度传感器，专为冷却塔振动监测设计，转速低至90rpm。

Description
The Velomitor* CT Velocity Transducer is a low-frequency version of our standard Velomitor Piezo-velocity Sensor. Its design specifically measures casing vibration velocity on cooling tower and air-cooled heat-exchanger fan assemblies that operate at or above 90 rpm (100 to 300 rpm typical). The Velomitor CT Transducer can measure vibration amplitudes at these frequencies as well as the vibration frequencies generated by the fan motor and speed reducer.
Specifications
Parameters are specified from +20 C to +30 C (+68 F to +86 F) and 100 Hz unless otherwise indicated.
Electrical
Sensitivity
3.94 mV/mm/s (100 mV/in/s) ±5%.
Frequency Response
3.0 Hz to 900 Hz (180 to 54,000 cpm) ±1.0 dB ；1.5 Hz to 1.0 kHz (90 to 60,000 cpm) ±3.0 dB
Temperature Sensitivity
-8% to +5% typical over the operating temperature range.
Velocity Range
63.5 mm/s pk (2.5 in/s pk)  Vibration components in excess of 10g pk，above 1 kHz can significantly，reduce this range.
Transverse Response
Less than 5% of the axial sensitivity.
Amplitude Linearity
±2% to 63.5 mm/s pk (2.5 in/s pk)
Mounted Resonant Frequency
9 kHz, minimum (stud mounted, except quick disconnect)
Output Bias Voltage
10.1 Vdc±1.0 Vdc , Pin A referenced to Pin B
Dynamic Output Impedance
<400 Ω typical
Broadband Noise Floor (1.5 Hz to 1 kHz)
0.229 mm/s (0.009 in/s) pk. See Figure 6 for typical noise floor.
Base Strain Sensitivity
0.43 mm/s/μstrain (0.017 in/s/μstrain).
Grounding
Internal electronics are isolated from case.
Maximum Cable Length
305 metres (1,000 feet) of cable (part number 02173006) with no degradation of signal. Note: Maximum continuous length of cable available is 300 feet. If longer lengths are required they must be spliced or have a connector installed on them.

Environmental Limits
Operating Temperature
-40 C to +85 C (-40 F to +185 F).
Storage Temperature
-40 C to +100 C (-40 F to +212 F).
Shock Limit
5000 g pk, maximum.
Humidity Limit
100% condensing, non-submerged.
Magnetic Field Susceptibility
<0.0068 mm/s/gauss (0.268 mil/s/gauss) @ 50 gauss, 50-60Hz

Ordering Information
Velomitor CT Velocity Transducer
190501-AA-BB-CC

A: Mounting Hardware Option
0 0   No stud
0 1   Stud 3/8-in 24 to 3/8-in 24
0 2   Stud 3/8-in 24 to 1/2-in 20
0 3   Adhesive Stud 3/8-in 24
0 4   Stud M6x1 with 3/8-in 24 adapter
0 5   Adhesive Stud M6x1 with 3/8-24 adapter
0 6   Stud 3/8-in 24 to 1/4-in 28
0 7   Plate Stud 3/8-in 24 to 3/8-in 24
0 8   Plate Stud 3/8-in 24 to 1/2-in 20
0 9   Plate Stud 3/8-in 24 to 1/4-in NPT
1 0   Plate Stud M6x1 to M6x1with 3/8-in 24 adapter
1 1   Plate Stud 3/8-in 24 to 1/4-in 28
1 2   Plate Stud 3/8-in 24 to M8x1
1 3   Quick disconnect stud
1 4   Adapter, 3/8-in 24 to 1/4-in 20
1 5   Adapter, 3/8-in 24 to 5/16-in 18
1 6   Adapter, 3/8-in 24 to 3/8-in 24
1 7   Adapter, 3/8-in 24 to 3/8-in 16
1 8   Adapter, 3/8-in 24 to 1/2-in 13
1 9   Adapter, 3/8-in 24 to 1/4-in 18 NPT
2 0   Adapter, 3/8-in 24 to 3/8-in 18 NPT
2 1   Adapter, 3/8-in 24 to 1/2-in 14 NPT
2 2   Adapter, 3/8-in 24 to 3/4-in 14 NPT
2 3   Adapter, 3/8-in 24 to 1.0-in 11.5 NPT
2 4   Adapter, 3/8-in 24 to 1.25-in 11.5 NPT

B: Connection Option
0 0   MIL-C-5015 connection interface
9 9   Unit with included 32 foot cable

C: Agency Approval Option
0 0   No approvals
0 1   Multiple approvals
0 2   Multiple approvals
0 3   Multiple approvals
0 4   Multiple approvals